Typical jobs
- Driveways, including steep hillside driveways.
- Crossovers and kerbs, with council's approval process.
- House slabs and footings after demolition.
- Garage and shed slabs.
- Paths, patios and pool surrounds.
- Retaining wall footings.
Hillside driveways
Terrigal, Wamberal, Avoca, Point Clare and Gosford's escarpment suburbs have driveways at grades that challenge machines and trucks. The approach depends on the grade, width, turning room at the top and bottom, and whether traffic control is needed on the street.
Flat sandy blocks
On the Peninsula and around the lakes, access is usually easy but soft sandy ground can bog trucks in wet weather. Ground protection mats and scheduling around rain help.
Reinforcement and thickness
Mesh and bar need hammering rather than bucket breaking, and older driveways laid over earlier concrete can be twice as thick as expected. The inspection checks edges and cores where needed.
Services underneath
A Before You Dig Australia enquiry, and locating where pipes or cables may run below. Saw-cutting at boundaries and against retained concrete.
The crossover
The crossover is on council land. Removal or reconstruction generally needs an application and inspection with Central Coast Council, and the new crossover has to meet council's standards. See council and approvals.
Disposal
Clean concrete is recyclable; mixed loads cost more; asbestos-contaminated material must go to a licensed facility.
Costs
See the 2026 cost bands.
Call 02 5024 3718 or send the job details through.